STC1

Overview

The STC1 Controller has been designed to work in conjunction with the range of Small Timber Dryers manufactured by Ebac Industrial Products Ltd. These products include the LD800, LD82, LD3000 and FD100 range of equipment. The controller will operate from supply voltages of 115V to 230V at 50 or 60Hz. The controller consists of a proportional timer, to control the drying cycle, and thermostat to control the heating cycle, both functions can be programmed to operate independently, or with crossover selected, reliant upon the other function

Installation

Ebac Industrial Products recommend the STC1 Controller is mounted outside the drying kiln in order to allow easy monitoring and adjustment. Note:- the fixing points located on the underside of the control box, 1 "hook" type positioned towards the top, and 2 holes located at the bottom of the controller. Using a suitable wall fixing, secure the single top mounting first. Remove the 2 screws retaining the front cover, identify the 2 remaining fixing holes. Ensure the control box is level, and mark through these fixings onto the wall. Using suitable wall fixings secure to the 2 remaining points to the wall. Further information regarding Kiln design and installations can be found within the Timber Dryer manual.